Полный список шагов настройки sed для разработчиков

1. sudo apt-get install apache2

2. sudo cp /etc/apache2/apache2.conf /etc/apache2/apache2.conf.bak

3. sudo nano /etc/apache2/apache2.conf

# The directory where shm and other runtime files will be stored.
DefaultRuntimeDir ${APACHE_RUN_DIR}

# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
PidFile ${APACHE_PID_FILE}

# Timeout: The number of seconds before receives and sends time out.
Timeout 300

# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On

# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100

# KeepAliveTimeout: Number of seconds to wait for the next request from the same client on the same connection.
KeepAliveTimeout 5

# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}

# HostnameLookups: Log the names of clients or just their IP addresses e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the nameserver.
HostnameLookups Off

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog ${APACHE_LOG_DIR}/error.log

# LogLevel: Control the severity of messages logged to the error_log.
# Available values: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the log level for particular modules, e.g.
# "LogLevel info ssl:warn"
LogLevel warn

# Include module configuration:
IncludeOptional mods-enabled/*.load
IncludeOptional mods-enabled/*.conf

# Include list of ports to listen on
Include ports.conf

# Sets the default security model of the Apache2 HTTPD server. It does
# not allow access to the root filesystem outside of /usr/share and /var/www.
# The former is used by web applications packaged in Debian,
# the latter may be used for local directories served by the web server. If
# your system is serving content from a sub-directory in /srv you must allow
# access here, or in any related virtual host.
<Directory />
        Options FollowSymLinks
        AllowOverride None
        Require all denied
</Directory>

<Directory /usr/share>
        AllowOverride None
        Require all granted
</Directory>

<Directory /var/www/>
        Options Indexes FollowSymLinks
        AllowOverride All
        Require all granted
</Directory>

# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
AccessFileName .htaccess

# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
        Require all denied
</FilesMatch>

#
# The following directives define some format nicknames for use with
# a CustomLog directive.
#
# These deviate from the Common Log Format definitions in that they use %O
# (the actual bytes sent including headers) instead of %b (the size of the
# requested file), because the latter makes it impossible to detect partial
# requests.
#
# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
# Use mod_remoteip instead.
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.
# Include generic snippets of statements
IncludeOptional conf-enabled/*.conf

# Include the virtual host configurations:
IncludeOptional sites-enabled/*.conf

# vim: syntax=apache ts=4 sw=4 sts=4 sr noet

4. sudo nano /etc/apache2/conf-available/security.conf

ServerTokens Prod
ServerSignature Off

5. sudo a2enmod rewrite

6. sudo apt install php7.0 php-pear libapache2-mod-php7.0
(для Ubuntu18.04: sudo apt install php7.2 php-pear libapache2-mod-php7.2)

7. sudo apt-get install php7.0-curl php7.0-gd php7.0-ldap php7.0-pgsql php7.0-mbstring php7.0-zip php-apcu php-imagick php7.0-imap php7.0-intl php7.0-xmlrpc php7.0-soap php-xdebug
(для Ubuntu18.04: sudo apt-get install php7.2-curl php7.2-gd php7.2-ldap php7.2-pgsql php7.2-mbstring php7.2-zip php-apcu php-imagick php7.2-imap php7.2-intl php7.2-xmlrpc php7.2-soap php-xdebug)

8. sudo nano /etc/apache2/ports.conf

Listen 12080

9.1. sudo mkdir -p /var/www/sed

9.2. sudo nano /etc/apache2/sites-available/sed.conf

<VirtualHost *:12080>     
ServerName sed.local
ServerAdmin webmaster@localhost
DocumentRoot /var/www/sed

ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
</VirtualHost>

# vim: syntax=apache ts=4 sw=4 sts=4 sr noet

9.3

sudo ln -s /etc/apache2/sites-available/sed.conf /etc/apache2/sites-enabled/
sudo rm /etc/apache2/sites-enabled/000-default.conf	 

9.4 sudo nano /etc/hosts

127.0.0.1    sed.local

10. sudo apt-get install nginx

11.

sudo service apache2 restart
sudo service nginx restart

12. sudo cp /etc/nginx/nginx.conf /etc/nginx/nginx.conf.bak

13. sudo nano /etc/nginx/nginx.conf

user www-data;
worker_processes auto;
pid /run/nginx.pid;
include /etc/nginx/modules-enabled/*.conf;

events {
        worker_connections 768;
        # multi_accept on;
}

http {

        ##
        # Basic Settings
        ##

        sendfile on;
        tcp_nopush on;
        tcp_nodelay on;
        keepalive_timeout 65;
        types_hash_max_size 2048;
        # server_tokens off;
        client_max_body_size 500m;
        # server_names_hash_bucket_size 64;
        # server_name_in_redirect off;

        include /etc/nginx/mime.types;
        default_type application/octet-stream;

        ##
        # SSL Settings
        ##

        ssl_protocols TLSv1 TLSv1.1 TLSv1.2; # Dropping SSLv3, ref: POODLE
        ssl_prefer_server_ciphers on;

        ##
        # Logging Settings
        ##

        access_log /var/log/nginx/access.log;
        error_log /var/log/nginx/error.log;
		 ##
        # Gzip Settings
        ##

        gzip on;
        gzip_disable "msie6";

        # gzip_vary on;
        # gzip_proxied any;
        # gzip_comp_level 6;
        # gzip_buffers 16 8k;
        # gzip_http_version 1.1;
        # gzip_types text/plain text/css application/json application/javascript text/xml application/xml application/xml+rss text/javascript;

        ##
        # nginx-naxsi config
        ##
        # Uncomment it if you installed nginx-naxsi
        ##

        #include /etc/nginx/naxsi_core.rules;
		##
        # Virtual Host Configs
        ##

        include /etc/nginx/conf.d/*.conf;
        include /etc/nginx/sites-enabled/*;
}

14. sudo cp /etc/nginx/sites-available/default /etc/nginx/sites-available/default.bak

15.1. sudo nano /etc/nginx/sites-available/sed

upstream php {
    server 127.0.0.1:12080;
}

server {
        listen 80 default_server;
        #listen [::]:80 default_server;

        # SSL configuration
        #
        # listen 443 ssl default_server;
        # listen [::]:443 ssl default_server;
        #
        # Note: You should disable gzip for SSL traffic.
        # See: https://bugs.debian.org/773332
        #
        # Read up on ssl_ciphers to ensure a secure configuration.
        # See: https://bugs.debian.org/765782
        #
        # Self signed certs generated by the ssl-cert package
        # Don't use them in a production server!
        #
        # include snippets/snakeoil.conf;
        proxy_connect_timeout       600;
        proxy_send_timeout          600;
        proxy_read_timeout          600;
        send_timeout                600;
		
		server_name sed.local;        
        root /var/www/sed;
                 # Add index.php to the list if you are using PHP
        index index.php index.html;
    
		location / {
                # First attempt to serve request as file, then
                # as directory, then fall back to displaying a 404.
                try_files $uri $uri/ =404;
                # Uncomment to enable naxsi on this location
                # include /etc/nginx/naxsi.rules;
                add_header prc f;
        }

        location ^~ /svn/ {
            proxy_pass http://php;
        }

#       location ^~ /moodle/ {
#            proxy_pass http://php;
#        }

        location ~ \.php$ {
            proxy_pass http://php;
            add_header prc ppe;
        }
        location ~ \.php\.t$ {
            proxy_pass http://php;
            add_header prc pte;
        }
        location = / {
            proxy_pass http://php;
            add_header prc pi;
        }
		location ~ /[^/.]+$ {
            if ( -f $request_filename.php ) {
                    proxy_pass http://php;
            }
            if ( -f $request_filename.php.t ) {
                    proxy_pass http://php;
                    add_header prc pt;
            }
        }
        location ^~ /gen/ {
            proxy_pass http://php;
        }
                 location ^~ /file/ {
            proxy_pass http://php;
        }


        location ~ ^/(?:\.|cfg|az/cfg-sample) {
            deny all;
        }
		# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
        #
        #location ~ \.php$ {
        #       include snippets/fastcgi-php.conf;
        #
        #       # With php5-cgi alone:
        #       fastcgi_pass 127.0.0.1:9000;
        #       # With php5-fpm:
        #       fastcgi_pass unix:/var/run/php5-fpm.sock;
        #}

        # deny access to .htaccess files, if Apache's document root
        # concurs with nginx's one
        #
        #location ~ /\.ht {
        #       deny all;
        #}
}

15.2.

sudo ln -s /etc/nginx/sites-available/sed /etc/nginx/sites-enabled/
sudo rm /etc/nginx/sites-enabled/default 

16. sudo service nginx restart

17. sudo apt-get install libapache2-mod-rpaf

18. sudo apt-get install poppler-utils

19. sudo apt-get install netpbm

20.1.

sudo add-apt-repository "deb http://apt.postgresql.org/pub/repos/apt/ $(lsb_release -sc)-pgdg main"
wget --quiet -O - https://www.postgresql.org/media/keys/ACCC4CF8.asc | sudo apt-key add -
sudo apt-get update
sudo apt-get install postgresql-9.6

20.2. sudo nano /etc/postgresql/9.6/main/postgresql.conf

ssl = off

20.3. sudo service postgresql restart

21.1 sudo chown -R $USER:$USER /var/www/sed

скачать sed из репозитория в /var/www/sed

22.2

• скопировать с сервера файл /cabinet/config.php себе в проект в ту же директорию
• скопировать с сервера папку /cfg-local себе в проект

22.3

sudo chown -R $USER:$USER /var/www/sed 
sudo chmod -R 755 /var/www/sed	

22.4

sudo chown -R www-data:www-data /var/www/sed/cache
sudo chown -R www-data:www-data /var/www/sed/storage
sudo chmod -R 777 /var/www/sed/cache
sudo chmod -R 777 /var/www/sed/storage

22.5. в файле /cfg/db.ini изменить пути

docfile_storage=/var/www/sed/storage/docfiles
storagedir = /var/www/sed/storage

23. Настройка БД и постгреса.

23.1 скопировать с сервера папку /usr/share/postgresql/9.6/tsearch_data себе на компьютер в ту же директорию

23.2. сменить дефолтный пароль постгреса:

а) sudo -u postgres psql postgres
б) \password postgres
в) Ввести пароль ЕДИНИЧКУ (1)
г) Повторить пароль
д) \q

23.3. Добавляем юзера 'www-data':

а) sudo -u postgres psql postgres
б) CREATE USER "www-data" WITH PASSWORD 'pass';
в) \q

23.4. Создаем БД:

а) sudo -u postgres psql postgres
б) CREATE DATABASE edfs OWNER "www-data";
в) \q

23.5. на сервере сделать бэкап БД:

pg_dump -h localhost -p 5432 -U postgres -F c -C -d edfs > ~/my-14-12-2018.edfs (14-12-2018 - дата бэкапа)

23.6. с сервера скопировать бэкап себе в /home/$USER

23.7. pg_restore -h localhost -p 5432 -U postgres -d edfs ~/my-14-12-2018.edfs

23.8. Сделаем pass единички:

а) sudo -u postgres psql postgres
б) \c edfs 
в) UPDATE public.users SET pass = 1;
г) \q

23.9.

sudo service apache2 restart
sudo service nginx restart
sudo service postgresql restart

24.

Для миграций, тессеракта устанавливаем пакетные менеджеры
sudo apt update
sudo apt install nodejs
sudo apt install npm
sudo apt install composer

24.1

В папке /var/www выполнить
npm install
composer install

24.2

Добавить юзера в группу и назначить права vendor'у
sudo usermod -a -G www-data user
sudo chown -R user:www-data vendor/
sudo chmod 775 -R vendor/

25. Если вы работаете локально, чтобы не было доступа к apache из вне можно прописать sudo nano /etc/apache2/ports.conf Listen 127.0.0.1:80 слушать только локальный порт.